INDIVIDUAL ADDRESSABLE: The WS2811 LED Pixel string lights work great with Arduino, FastLED library, Adafruit NeoPixel Library and Raspberry Pi. It is easy to program when you use a programmable controller such as T-1000S or K-1000C.

FULL COLORFUL: 256 brightness display and full 24-bit color display. Each LED can have its own color and brightness. You can control each LED Pixel individually and set it to any color or animation you want.

CUTTABLE&CONNECTABLE: Each RGB pixel can be cut off without damaging the rest pixels. Each LED Pixel string can be connected end to end, Maxim base on you controller. So you can DIY for any QTY pixels you want.

IP68 WATERPROOF: every LED pixel is weatherproof by silicone wraps, protects it very well and makes it easy to clean. You can put them outdoor even underwater.

WIDELY USED: Widely used on LOGO screen, advertising board, outdoor advertising signs and applied to hotel, KTV, bars, commercial street atmosphere lighting. Good for replace the traditional neon signs.




Kindly note
1) It comes without power supply and controller. You''ll need a controller such as an Arduino to use them.
2) The work voltage of the LED string must be 5V DC. Otherwise, it will be burnt out.
3) If you want to hook up more than one string, an external power supply is very necessary.
4) There are small arrows on circuit board to show the direction of the data flow. This will help you confirm the input and output end.

Product Description:
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Each RGB LED and controller chip is molded into a ''dot'' of silicone. The dots are weatherproof and rugged.
There are four flanges molded in so that you can ''push'' them into a 12mm drill hole in any material up to 1.5mm/0.06'' thick. They''re typically used to make outdoor signs.
The pixels are connected by a 3-conductor cable. +5V (Red), Ground (White) and Data (Green). And use 8mm diffused RGB LEDs, with a 120 degree beam width.
The total max brightness of all LEDs is about 1600mcd but with the light more evenly distributed & mixed than a clear LED.

Parameter
Connection: Red: +5V; White: GND; Green: DATA
Model: WS2811 LED pixel
light source: F8RGB*1
IC Model: WS2811 IC
Quantity: 50 LEDs / set
LED Shape: Round
Color: full color, 24-bit
Gray level: 256
Length: 11.5ft (3.5m) per set
Size: Please refer to the picture
The standard operating voltage: DC 5V
Power: 0.3W/LED (15W/Set)
Waterproof: IP68 waterproof

Package:
10pack 50pcs WS2811 LED pixels light
ASIN : B07FPCQL6L
PROD번호 : 690814789
정보업데이트 : CV.34266 : 2019-11-22 오전 8:45:18